Location of Serial Number
Serial number is of the format “A1234567890”
Serial Number can also be found under the electronics panel cover
TECHNICAL DATA |
|||||||||||||||||
SIZE |
WORKING |
WORKING |
RATED FLOW |
OIL SPILLAGE |
MINIMUM BURST PRESSURE |
CONNECTION / |
|||||||||||
DN |
inch |
Dash |
MPa |
PSI |
MPa |
PSI |
l/min |
US |
cc. |
cubic |
Male |
Female |
M & F |
||||
MPa |
PSI |
MPa |
PSI |
MPa |
PSI |
||||||||||||
19 | 3/4 | 12 | 35 | 5,075 | 25 | 3,625 | 120 | 31.7 | 7 | 0.427 | 120 | 17,400 | 120 | 17,400 | 180 | 26,100 | Residual pressure |
25 | 1 | 16 | 35 | 5,075 | 25 | 3,625 | 210 | 55.5 | 13 | 0.794 | 120 | 17,400 | 110 | 15,950 | 180 | 26,100 | Residual pressure |
31 | 1.1/4 | 20 | 35 | 5,075 | 25 | 3,625 | 385 | 101.7 | 22 | 1.343 | 100 | 14,500 | 100 | 14,500 | 150 | 21,750 | Residual pressure |
38 | 1.1/2 | 24 | 35 | 5,075 | 25 | 3,625 | 485 | 128.1 | 35 | 2.137 | 100 | 14,500 | 120 | 17,400 | 150 | 21,750 | Residual pressure |
51 | 2 | 32 | 35 | 5,075 | 25 | 3,625 | 780 | 206.1 | 80 | 4.884 | 100 | 14,500 | 100 | 14,500 | 180 | 26,100 | Residual pressure |
The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow |
• Screw-type couplings specially designed for Oil & Gas applications
• Wing Nut shaped sleeve for easier connection and disconnection by hand, also in case of residual pressure in the line
• Connection secured on the thread between the sleeve and the female coupling
• Inspection holes to check full connection
• Shut-off by poppet valve
• Interchangeable with similar products available on the market
Female and male couplings in high grade carbon steel. Springs in C98 steel, seals in NBR (other materials available on request) and back-up ring in PTFE
-22ºF up to +230ºF (-30ºC up to +110ºC)
4:1 for dynamic pressures
500,000 cycles (connected and disconnected conditions) at 120% of the rated one (freq. 1Hz)
ISO 18869
BSP | ||||
Q07711041A/Q07611041A |
Q07711041A Q07611041A |
|||||||||||
BSP TERMINATION ENDS TO DIN 3852 X TYPE |
SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||||||||||
DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | G | H | T | |
19 | 3/4 | -12 | Q07711041A-12-12 | Q07611041A-12-12 | 3/4" | 83.7 | 72 | A+B-31,5 | 76 | ⌀52 | ⌀36 | ⌀35 | 31.8 | 1-3/4-8 SPECIAL |
25 | 1 | -16 | Q07711041A-16-16 | Q07611041A-16-16 | 1" | 106 | 86.8 | A+B-40 | 107 | ⌀67 | ⌀45 | ⌀45 | 41 | STUB ACME 2-1/4-6 |
31 | 1.1/4 | -20 | Q07711041A-20-20 | Q07611041A-20-20 | 1.1/4" | 136 | 111.8 | A+B-51 | 118 | ⌀78 | ⌀55,5 | ⌀54,5 | 50 | STUB ACME 2-5/8-6 |
38 | 1.1/2 | -24 | Q07711041A-24-24 | Q07611041A-24-24 | 1.1/2" | 151.5 | 127.5 | A+B-58 | 145.2 | ⌀95,2 | ⌀63,5 | ⌀63,5 | 57.1 | STUB ACME 3-1/4 – 4 |
51 | 2 | -32 | Q07711041A-32-32 | Q07611041A-32-32 | 2" | 179 | 154 | A+B-78 | 168.7 | ⌀118,7 | ⌀83 | ⌀82,5 | 76.2 | STUB ACME 4 – 4 |
NPT | ||||
Q07711341A/Q07611341A |
Q07711341A Q07611341A |
|||||||||||
NPTF TERMINATION ENDS TO ANSI B 1.20.3 |
SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||||||||||
DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | G | H | T | |
19 | 3/4 | -12 | Q07711341A-12-12 | Q07611341A-12-12 | 3/4" NPTF | 83.7 | 72 | A+B-31,5 | 76 | ⌀52 | ⌀36 | ⌀35 | 31.8 | 1-3/4-8 SPECIAL |
25 | 1 | -16 | Q07711341A-16-16 | Q07611341A-16-16 | 1" NPTF | 106 | 86.8 | A+B-40 | 107 | ⌀67 | ⌀45 | ⌀45 | 41 | STUB ACME 2-1/4-6 |
31 | 1.1/4 | -20 | Q07711341A-20-20 | Q07611341A-20-20 | 1.1/4" NPTF | 136 | 111.8 | A+B-51 | 118 | ⌀78 | ⌀55,5 | ⌀54,5 | 50 | STUB ACME 2-5/8-6 |
38 | 1.1/2 | -24 | Q07711341A-24-24 | Q07611341A-24-24 | 1.1/2" NPTF | 151.5 | 127.5 | A+B-58 | 145.2 | ⌀95,2 | ⌀63,5 | ⌀63,5 | 57.1 | STUB ACME 3-1/4 – 4 |
51 | 2 | -32 | Q07711341A-32-32 | Q07611341A-32-32 | 2" NPTF | 179 | 154 | A+B-78 | 168.7 | ⌀118,7 | ⌀83 | ⌀82,5 | 76.2 | STUB ACME 4 – 4 |