Location of Serial Number
Serial number is of the format "A1234567890"
Serial Number can also be found under the electronics panel cover
ISO A POPPET VALVE – MQS-A
19
|
TECHNICAL DATA |
|||||||||||||||||
|
SIZE |
WORKING |
RATED FLOW |
CONNECTION |
OIL SPILLAGE |
MINIMUM BURST PRESSURE |
CONNECTION / |
|||||||||||
|
DN |
inch |
Dash |
MPa |
PSI |
l/min |
US |
N |
lb. |
cc. |
cubic |
Male |
Female |
M & F |
||||
|
MPa |
PSI |
MPa |
PSI |
MPa |
PSI |
||||||||||||
| 6 | 1/4 | 4 | 35 | 5,075 | 5 | 1.3 | 60 | 13.5 | 0.7 | 0.043 | 200 | 29,000 | 150 | 21,750 | 150 | 21,750 | Not allowed |
| 10 | 3/8 | 6 | 35 | 5,075 | 37 | 9.2 | 80 | 18.0 | 1.4 | 0.085 | 140 | 20,300 | 150 | 21,750 | 150 | 21,750 | Not allowed |
| 12 | 1/2 | 8 | 30 | 4,350 | 68 | 19.8 | 80 | 18.0 | 2.0 | 0.122 | 125 | 18,125 | 150 | 21,750 | 150 | 21,750 | Not allowed |
| 19 | 3/4 | 12 | 25 | 3,625 | 142 | 38.8 | 90 | 20.2 | 7.0 | 0.427 | 100 | 14,500 | 120 | 17,400 | 100 | 14,500 | Not allowed |
| 25 | 1 | 16 | 25 | 3,625 | 250 | 66.1 | 90 | 20.2 | 11.0 | 0.671 | 100 | 14,500 | 100 | 14,500 | 100 | 14,500 | Not allowed |
| 32 | 1.1/4 | 20 | 25 | 3,625 | 390 | 103.0 | 90 | 20.2 | 15.0 | 0.915 | 100 | 14,500 | 100 | 14,500 | 105 | 15,225 | Not allowed |
| 38 | 1.1/2 | 24 | 22 | 3,190 | 553 | 146.1 | 100 | 22.5 | 21.0 | 1.281 | 90 | 13,050 | 100 | 14,500 | 100 | 14,500 | Not allowed |
| 51 | 2 | 32 | 15 | 2,175 | 838 | 221.4 | 225 | 50.6 | 45.0 | 2.746 | 60 | 8,700 | 60 | 8,700 | 90 | 13,050 | Not allowed |
| The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow | |||||||||||||||||
PRODUCT DESCRIPTION
• Reference series on the agriculture and industrial market
• Simple connection and disconnection by pulling back the sleeve
• Positive, quick connection of the male into the female by the latching ball system
• Shut-off by poppet valve
• High resistant materials and hardened male and sleeve to withstand the brinelling effect
• Interchangeability according to ISO 7241 series A
MATERIAL
Female and male couplings in steel, with some hardened areas, in correspondence to the most stressed points. Springs in C98 steel, seals in NBR (other materials on request) and back-up ring in PTFE. PU seal on ½” female available on request.
WORKING TEMPERATURE
-22ºF up to +230ºF (-30ºC up to +110ºC)
For other temperatures, the coupling may be assembled with the specific seals
SAFETY FACTOR
4:1 for dynamic pressures
IMPULSE PRESSURES
100,000 cycles at 133% of the rated one (freq. 1Hz)
TEST SPECIFICATIONS
ISO 18869
| BSP | ||||
| Q00811021A-Q00211021A | Q00811050A-Q00211050A | Q00811041A-Q00211041A | ||
 |
Q00811021A Q00211021A |
||||||||||
| BSPT TERMINATION ENDS TO ISO 7-1 TAPERED |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 6.3 | 1/4" | -04 | Q00811021A-04-04 | Q00211021A-04-04 | 1/4" | 48.8 | 34.5 | A+B-14,3 | ⌀24 | 17 | 17 |
| 10 | 3/8" | -06 | Q00811021A-06-06 | Q00211021A-06-06 | 3/8" | 57.8 | 40 | A+B-17,8 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811021A-08-08 | Q00211021A-08-08 | 1/2" | 67.1 | 45 | A+B-22,1 | ⌀38 | 27 | 27 |
| 20 | 3/4" | -12 | Q00811021A-12-12 | Q00211021A-12-12 | 3/4" | 83.5 | 56.5 | A+B-27 | ⌀45 | 34 | 34 |
| 25 | 1" | -16 | Q00811021A-16-16 | Q00211021A-16-16 | 1" | 97.9 | 64.5 | A+B-32,7 | ⌀52,3 | 41 | 41 |
 |
Q00811050A Q00211050A |
||||||||||
| BSP TERMINATION ENDS TO ISO 8434-6 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811050A-06-06 | Q00211050A-06-06 | 3/8" | 64.7 | 56.2 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811050A-08-06 | Q00211050A-08-06 | 3/8" | 68.9 | 57.7 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811050A-08-08 | Q00211050A-08-08 | 1/2" | 71.4 | 60.2 | A+B-21,8 | ⌀38 | 27 | 27 |
 |
Q00811041A Q00211041A |
||||||||||
| BSP TERMINATION ENDS TO DIN 3852 X TYPE |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 6.3 | 1/4" | -04 | Q00811041A-04-04 | Q00211041A-04-04 | 1/4" | 48.8 | 34.5 | A+B-14,2 | ⌀24 | 17 | 17 |
| 10 | 3/8" | -06 | Q00811041A-06-04 | Q00211041A-06-04 | 1/4" | 63 | 54.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811041A-06-06 | Q00211041A-06-06 | 3/8" | 57.8 | 40 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811041A-08-06 | Q00211041A-08-06 | 3/8" | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811041A-08-08 | Q00211041A-08-08 | 1/2" | 67 | 45 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811041A-08-12 | Q00211041A-08-12 | 3/4" | 69 | 53 | A+B-21,8 | ⌀38 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811041A-12-08 | Q00211041A-12-08 | 1/2" | 85.7 | 66.3 | A+B-26,7 | ⌀45 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811041A-12-12 | Q00211041A-12-12 | 3/4" | 83.5 | 56.5 | A+B-26,7 | ⌀45 | 34 | 34 |
| 25 | 1" | -16 | Q00811041A-16-12 | Q00211041A-16-12 | 3/4" | 97.9 | 64.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 25 | 1" | -16 | Q00811041A-16-16 | Q00211041A-16-16 | 1" | 97.9 | 64.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 31.5 | 1.1/4" | -20 | Q00811041A-20-20 | Q00211041A-20-20 | 1.1/4" | 118 | 75 | A+B-43 | ⌀69 | 50 | 50 |
| 40 | 1.1/2" | -24 | Q00811041A-24-24 | Q00211041A-24-24 | 1.1/2" | 133 | 84 | A+B-49 | ⌀83 | 60 | 60 |
| 51 | 2" | -32 | Q00811041A-32-32 | Q00211041A-32-32 | 2" | 164 | 104 | A+B-60,2 | ⌀100 | 75 | 75 |
| METRIC | ||||
| Q00811110A-Q00211110A | Q00811120A-Q00211120A | Q00811191A-Q00211191A | Q00811770B-Q00211770B | Q00811870B-Q00211870B |
| Q00811141A-Q00211141A | ||||
 |
Q00811110A Q00211110A |
||||||||||
| METRIC TERMINATION ENDS TO ISO 8434-1 l series |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 6.3 | 1/4" | -04 | Q00811110A-04-14 | Q00211110A-04-14 | M14x1,5 | 52.1 | 42 | A+B-14,2 | ⌀24 | 17 | 17 |
| 10 | 3/8" | -06 | Q00811110A-06-12 | Q00211110A-06-12 | M12x1,5 | 61 | 52.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811110A-06-14 | Q00211110A-06-14 | M14x1,5 | 61 | 52.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811110A-06-16 | Q00211110A-06-16 | M16x1,5 | 61 | 52.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811110A-06-18 | Q00211110A-06-18 | M18x1,5 | 61 | 52.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811110A-08-14 | Q00211110A-08-14 | M14x1,5 | 65.2 | 54 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811110A-08-16 | Q00211110A-08-16 | M16x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811110A-08-18 | Q00211110A-08-18 | M18x1,5 | 65.2 | 54 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811110A-08-22 | Q00211110A-08-22 | M22x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811110A-08-26 | Q00211110A-08-26 | M26x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 20 | 3/4" | -12 | Q00811110A-12-18 | Q00211110A-12-18 | M18x1,5 | 85.4 | 66.3 | A+B-26,7 | ⌀45 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811110A-12-22 | Q00211110A-12-22 | M22x1,5 | 85.7 | 66.3 | A+B-26,7 | ⌀45 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811110A-12-26 | Q00211110A-12-26 | M26x1,5 | 85.7 | 66.3 | A+B-26,7 | ⌀45 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811110A-12-30 | Q00211110A-12-30 | M30x2 | 87.7 | 68.3 | A+B-26,7 | ⌀45 | 34 | 34 |
| 25 | 1" | -16 | Q00811110A-16-26 | Q00211110A-16-26 | M26x1,5 | 94.5 | 79.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 25 | 1" | -16 | Q00811110A-16-30 | Q00211110A-16-30 | M30x2 | 96.5 | 81.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 25 | 1" | -16 | Q00811110A-16-36 | Q00211110A-16-36 | M36x2 | 97 | 81.5 | A+B-32,7 | ⌀52 | 41 | 41 |
 |
Q00811120A Q00211120A |
||||||||||
| METRIC TERMINATION ENDS TO ISO 8434-1 S SERIES |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811120A-06-16 | Q00211120A-06-16 | M16x1,5 | 62 | 53.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811120A-06-18 | Q00211120A-06-18 | M18x1,5 | 62 | 53.5 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811120A-08-18 | Q00211120A-08-18 | M18x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811120A-08-20 | Q00211120A-08-20 | M20x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811120A-08-24 | Q00211120A-08-24 | M24x1,5 | 68.2 | 57 | A+B-21,8 | ⌀38 | 27 | 27 |
| 25 | 1" | -16 | Q00811120A-16-30 | Q00211120A-16-30 | M30x2 | 98.5 | 83.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 25 | 1" | -16 | Q00811120A-16-36 | Q00211120A-16-36 | M36x2 | 100.5 | 85.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 25 | 1" | -16 | Q00811120A-16-42 | Q00211120A-16-42 | M40x2 | 102.5 | 87.5 | A+B-32,7 | ⌀52 | 46 | 46 |
 |
Q00811191A Q00211191A |
||||||||||
| METRIC TERMINATION ENDS TO ISO 6149-1 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 12.5 | 1/2" | -08 | Q00811191A-08-16 | Q00211191A-08-16 | M16x1,5 | 66.7 | 55.5 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811191A-08-18 | Q00211191A-08-18 | M18x1,5 | 68.2 | 57 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811191A-08-22 | Q00211191A-08-22 | M22x1,5 | 67 | 48 | A+B-21,8 | ⌀38 | 27 | 27 |
 |
Q00811770B Q00211770B |
|||||||||||
| METRIC TERMINATION ENDS TO ISO 8434-1 BULKHEAD L SERIES | ||||||||||||
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | G | |
| 10 | 3/8" | -06 | Q00811770B-06-12 | Q00211770B-06-12 | M12x1,5 | 76 | 67.5 | A+B-17,5 | ⌀30 | 22 | 22 | 25 |
| 10 | 3/8" | -06 | Q00811770B-06-14 | Q00211770B-06-14 | M14x1,5 | 75 | 66.5 | A+B-17,5 | ⌀30 | 22 | 22 | 25 |
| 10 | 3/8" | -06 | Q00811770B-06-16 | Q00211770B-06-16 | M16x1,5 | 75 | 66.5 | A+B-17,5 | ⌀30 | 22 | 22 | 26 |
| 10 | 3/8" | -06 | Q00811770B-06-18 | Q00211770B-06-18 | M18x1,5 | 75 | 66.5 | A+B-17,5 | ⌀30 | 22 | 22 | 26 |
| 12.5 | 1/2" | -08 | Q00811770B-08-14 | Q00211770B-08-14 | M14x1,5 | 80.2 | 69 | A+B-21,8 | ⌀38 | 27 | 27 | 25 |
| 12.5 | 1/2" | -08 | Q00811770B-08-16 | Q00211770B-08-16 | M16x1,5 | 80.2 | 69 | A+B-21,8 | ⌀38 | 27 | 27 | 26 |
| 12.5 | 1/2" | -08 | Q00811770B-08-18 | Q00211770B-08-18 | M18x1,5 | 80.2 | 69 | A+B-21,8 | ⌀38 | 27 | 27 | 26 |
| 12.5 | 1/2" | -08 | Q00811770B-08-22 | Q00211770B-08-22 | M22x1,5 | 81.2 | 70 | A+B-21,8 | ⌀38 | 27 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811770B-08-26 | Q00211770B-08-26 | M26x1,5 | 82.2 | 71 | A+B-21,8 | ⌀38 | 30 | 30 | 28 |
| 20 | 3/4" | -12 | Q00811770B-12-22 | Q00211770B-12-22 | M22x1,5 | 100.7 | 81.3 | A+B-26,7 | ⌀45 | 34 | 34 | 27 |
| 20 | 3/4" | -12 | Q00811770B-12-30 | Q00211770B-12-30 | M30x2 | 105.7 | 86.3 | A+B-26.7 | ⌀45 | 34 | 34 | 32 |
| 25 | 1" | -16 | Q00811770B-16-26 | Q00211770B-16-26 | M26x1,5 | 110.5 | 92.3 | A+B-32,7 | ⌀52 | 41 | 41 | 28 |
| 25 | 1" | -16 | Q00811770B-16-30 | Q00211770B-16-30 | M30x2 | 114.5 | 96.3 | A+B-32,7 | ⌀52 | 41 | 41 | 32 |
| 25 | 1" | -16 | Q00811770B-16-36 | Q00211770B-16-36 | M36x2 | 114.5 | 96.3 | A+B-32,7 | ⌀52 | 41 | 41 | 32 |
 |
Q00811870B Q00211870B |
|||||||||||
| METRIC TERMINATION ENDS TO ISO 8434-1 BULKHEAD S SERIES | ||||||||||||
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | G | |
| 10 | 3/8" | -06 | Q00811870B-06-16 | Q00211870B-06-16 | M16x1,5 | 76 | 67.5 | A+B-17,5 | ⌀30 | 22 | 22 | 27 |
| 10 | 3/8" | -06 | Q00811870B-06-18 | Q00211870B-06-18 | M18x1,5 | 76 | 67.5 | A+B-17,5 | ⌀30 | 22 | 22 | 27 |
| 12.5 | 1/2" | -08 | Q00811870B-08-18 | Q00211870B-08-18 | M18x1,5 | 81.2 | 70 | A+B-21,8 | ⌀38 | 27 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811870B-08-20 | Q00211870B-08-20 | M20x1,5 | 81.2 | 70 | A+B-21,8 | ⌀38 | 27 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811870B-08-24 | Q00211870B-08-24 | M24x1,5 | 83.2 | 72 | A+B-21,8 | ⌀38 | 27 | 27 | 29 |
| 25 | 1" | -16 | Q00811870B-16-30 | Q00211870B-16-30 | M30x2 | 116.5 | 101.5 | A+B-32,7 | ⌀52 | 41 | 41 | 34 |
| 25 | 1" | -16 | Q00811870B-16-36 | Q00211870B-16-36 | M36x2 | 118.5 | 103.5 | A+B-32,7 | ⌀52 | 41 | 41 | 36 |
| 25 | 1" | -16 | Q00811870B-16-42 | Q00211870B-16-42 | M40x2 | 120.5 | 105.5 | A+B-32,7 | ⌀52 | 41 | 41 | 40 |
 |
Q00811141A Q00211141A |
||||||||||
| METRIC TERMINATION ENDS TO ISO 3852-1 X TYPE |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811141A-06-16 | Q00211141A-06-16 | M16x1,5 | 64.5 | 56 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811141A-08-18 | Q00211141A-08-18 | M18x1,5 | 66.2 | 55 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811141A-08-20 | Q00211141A-08-20 | M20x1,5 | 67 | 45 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811141A-08-22 | Q00211141A-08-22 | M22x1,5 | 67 | 48 | A+B-21,8 | ⌀38 | 27 | 27 |
| NPT | ||||
| Q00811341A-Q00211341A | ||||
|
Q00811341A Q00211341A |
||||||||||
| NPTF TERMINATION ENDS TO ANSI B 1.20.3 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 6.3 | 1/4" | -04 | Q00811341A-04-04 | Q00211341A-04-04 | 1/4" NPTF | 48.8 | 34.5 | A+B-14,2 | ⌀24 | 17 | 17 |
| 10 | 3/8" | -06 | Q00811341A-06-06 | Q00211341A-06-06 | 3/8" NPTF | 57.8 | 40 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811341A-06-08 | Q00211341A-06-08 | 1/2" NPTF | 60.8 | 45 | A+B-17,5 | ⌀30 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811341A-08-08 | Q00211341A-08-08 | 1/2" NPTF | 67 | 45 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811341A-08-12 | Q00211341A-08-12 | 3/4" NPTF | 70 | 53 | A+B-22 | ⌀38 | 34 | 34 |
| 20 | 3/4" | -12 | Q00811341A-12-12 | Q00211341A-12-12 | 3/4" NPTF | 83.5 | 56.5 | A+B-26,7 | ⌀45 | 34 | 34 |
| 25 | 1" | -16 | Q00811341A-16-16 | Q00211341A-16-16 | 1" NPTF | 97.9 | 64.5 | A+B-32,7 | ⌀52 | 41 | 41 |
| 31.5 | 1.1/4" | -20 | Q00811341A-20-20 | Q00211341A-20-20 | 1.1/4" NPTF | 118.0 | 75.0 | A+B-43 | ⌀69 | 50 | 50 |
| 40 | 1.1/2" | -24 | Q00811341A-24-24 | Q00211341A-24-24 | 1.1/2" NPTF | 133.0 | 84.0 | A+B-49 | ⌀83 | 60 | 60 |
| SAE | ||||
| Q00811250A-Q00211250A | Q00811301A-Q00211301A | Q00811230A-Q00211230A | Q00811320A-Q00211320A | |
 |
Q00811250A Q00211250A |
||||||||||
| SAE TERMINATION ENDS TO ISO 8434-2 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811250A-06-08 | Q00211250A-06-08 | 3/4"-16 UNF | 67 | 58.2 | A+B-18,1 | ⌀30 | 22 | 22 |
 |
Q00811301A Q00211301A |
||||||||||
| SAE TERMINATION ENDS TO SAE J1926-1 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 6.3 | 1/4" | -04 | Q00811301A-04-06 | Q00211301A-04-06 | 9/16"-18 UNF | 50 | 34.5 | A+B-14,2 | ⌀24 | 17 | 17 |
| 10 | 3/8" | -06 | Q00811301A-06-06 | Q00211301A-06-06 | 9/16"-18 UNF | 64.5 | 56 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811301A-08-08 | Q00211301A-08-08 | 3/4"-16 UNF | 67 | 45 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811301A-08-10 | Q00211301A-08-10 | 7/8"-14 UNF | 69 | 50 | A+B-21,8 | ⌀38 | 27 | 27 |
| 12.5 | 1/2" | -08 | Q00811301A-08-12 | Q00211301A-08-12 | 1-1/16"-12 UN | 73 | 54 | A+B-21,8 | ⌀38 | 34 | 34 |
 |
Q00811230A Q00211230A |
|||||||||||
| SAE TERMINATION ENDS TO ISO 8434-2 BULKHEAD | ||||||||||||
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | G | |
| 10 | 3/8" | -06 | Q00811230A-06-06 | Q00211230A-06-06 | 9/16"-18 UNF | 83.8 | 75 | A+B-18 | ⌀30 | 22 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811230A-06-10 | Q00211230A-06-10 | 7/8"-14 UNF | 91.3 | 79.6 | A+B-17,5 | ⌀30 | 27 | 27 | 41 |
| 12.5 | 1/2" | -08 | Q00811230A-08-08 | Q00211230A-08-08 | 3/4"-16 UNF | 91.8 | 80.6 | A+B-21,8 | ⌀38 | 27 | 27 | 36.6 |
| 12.5 | 1/2" | -08 | Q00811230A-08-10 | Q00211230A-08-10 | 7/8"-14 UNF | 95.3 | 84.1 | A+B-21,8 | ⌀38 | 27 | 27 | 40.1 |
 |
Q00811320A Q00211320A |
||||||||||
| ORB TERMINATION ENDS TO SAE J1926-2 S SERIES |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811320A-06-06 | Q00211320A-06-06 | 9/16"-18 UNF | 63 | 54.4 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811320A-08-08 | Q00211320A-08-08 | 3/4"-16 UNF | 70 | 60 | A+B-21,8 | ⌀38 | 27 | 27 |
| ORFS | ||||
| Q00811240A-Q00211240A | ||||
 |
Q00811240A Q00211240A |
||||||||||
| ORFS TERMINATION ENDS TO ISO 8434-3 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 10 | 3/8" | -06 | Q00811240A-06-04 | Q00211240A-06-04 | 9/16"-18 UNF | 60.8 | 52.3 | A+B-17,5 | ⌀30 | 22 | 22 |
| 10 | 3/8" | -06 | Q00811240A-06-06 | Q00211240A-06-06 | 11/16"-16 UN | 61.2 | 52.7 | A+B-17,5 | ⌀30 | 22 | 22 |
| 12.5 | 1/2" | -08 | Q00811240A-08-08 | Q00211240A-08-08 | 13/16"-16 UN | 66.2 | 55.8 | A+B-21,8 | ⌀38 | 27 | 27 |
| 25 | 1" | -16 | Q00811240A-16-16 | Q00211240A-16-16 | 1.7/16"-12 UN | 100 | 81.8 | A+B-32,7 | ⌀52 | 41 | 41 |
SHIELDED POPPET VALVE
| SHIELDED POPPET VALVE | ||||
| Q00411041A | Q00411341A | Q00411301A | ||
 |
Q00411041A | ||||||||||
| BSP TERMINATION ENDS TO din 3852 x type |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||
| DN | Inch | Dash | Male coupling | A | B | |
| 12.5 | 1/2" | 08 | Q00411041A-08-08 | 1/2" | 47 | 27 |
|
Q00411341A | ||||||||||
| NPTF TERMINATION ENDS TO ANSI B 1.20.3 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||
| DN | Inch | Dash | Male coupling | A | B | |
| 12.5 | 1/2" | 08 | Q00411341A-08-08 | 1/2" NPTF | 47 | 27 |
|
Q00411301A | ||||||||||
| SAE TERMINATION ENDS TO SAE J1926-1 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | |||
| DN | Inch | Dash | Male coupling | A | B | |
| 12.5 | 1/2" | 08 | Q00411301A-08-08 | 3/4" UNF | 47 | 27 |