Location of Serial Number
Serial number is of the format "A1234567890"
Serial Number can also be found under the electronics panel cover
ISO A BALL VALVE – MQS-A
|
TECHNICAL DATA |
|||||||||||||||||
|
SIZE |
WORKING |
RATED FLOW |
CONNECTION |
OIL SPILLAGE |
MINIMUM BURST PRESSURE |
CONNECTION / |
|||||||||||
|
DN |
inch |
Dash |
MPa |
PSI |
l/min |
US |
N |
lb. |
cc. |
cubic |
Male |
Female |
M & F |
||||
|
MPa |
PSI |
MPa |
PSI |
MPa |
PSI |
||||||||||||
| 12 | 1/2 | 8 | 21 | 3,045 | 47 | 12.4 | 65 | 14.4 | 1.6 | 0.098 | 85 | 12,325 | 100 | 14,500 | 150 | 21,750 | Not allowed |
| The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow | |||||||||||||||||
PRODUCT DESCRIPTION
• Simple connection and disconnection by pulling back the sleeve
• Positive, quick connection of the male into the female by the latching ball system
• Shut-off by ball valve
• High resistant materials and hardened male and sleeve to withstand the brinelling effect
• Interchangeability according to ISO 7241 series A
MATERIAL
Female couplings in steel, with some hardened areas, in correspondence to the most stressed points. Male couplings in high grade carbon steel. Springs in C98 steel, seals in NBR (other materials on request) and back-up ring in PTFE
WORKING TEMPERATURE
-22ºF up to +230ºF (-30ºC up to +110ºC)
For other temperatures, the coupling may be assembled with the specific seals
SAFETY FACTOR
4:1 for dynamic pressures
IMPULSE PRESSURES
100,000 cycles at 133% of the rated one (freq. 1Hz)
TEST SPECIFICATIONS
ISO 18869
| BSP | ||||
| Q00911041A-Q00311041A | ||||
 |
Q00911041A Q00311041A |
||||||||||
| BSP TERMINATION ENDS TO DIN 3852 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 12.5 | 1/2" | -08 | Q00911041A-08-08 | Q00310041A-08-08 | 1/2" | 68.2 | 46.2 | A+B-21,8 | ⌀38 | 27 | 27 |
| NPT | ||||
| Q00911341A-Q00310341A | ||||
|
Q00911341A Q00310341A |
||||||||||
| NFTS TERMINATION ENDS TO ANSI B 1.20.3 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 12.5 | 1/2" | -08 | Q00911341A-08-08 | Q00310341A-08-08 | 1/2" NPTF | 68.2 | 46.2 | A+B-21,8 | ⌀38 | 27 | 27 |
| SAE | ||||
| Q00911301A-Q00310301A | ||||
 |
Q00911301A Q00310301A |
||||||||||
| SAE TERMINATION ENDS TO SAE J1926-1 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 12.5 | 1/2" | -08 | Q00911301A-08-08 | Q00310301A-08-08 | 3/4"-16 UNF | 67 | 45 | A+B-21,8 | ⌀38 | 27 | 27 |