FASTFIT DISCONNECTABLE

A “one plug” connection consisting of a male half integrated onto the hose and then inserted into the female cartridge.
This easy and safe operation does not require any tools for assembly and allows easy installation in restricted areas or in complex configurations. FastFit Disconnectable comes in a wide range of cartridges with direct connection on most standard ports, including BSP, SAE METRIC and NPTF.
In addition, the FastFit Disconnectable range offers all the benefits of standard FastFit technology, but with the ability to disconnect the plug from the cartridge if required.

TECHNICAL DATA

SIZE

WORKING
PRESSURE
Dynamic

DN Dash inch MPa PSI
12 -08 1/2" 42 6,090

PRODUCT DESCRIPTION

• Push-to-connect design
• No assembly tools required
• Low connection effort
• Reduced assembly time even in hard-to-reach areas
• Disconnection by unlocking male insert by means of a standard tool

MATERIAL

Adaptor and Insert in steel, with some hardened areas in correspondence to the most stressed points. Seals in NBR. Other materials (VITON, EPDM or any others) on request

WORKING TEMPERATURE

-22°F up to +230°F (-30°C up to +110°C)
For different temperature range, the coupling can be assembled with specific seals

SAFETY FACTOR

4:1 for dynamic pressures

IMPULSE PRESSURES

500,000 cycles at 120% of the rated one (freq. 1Hz)

TEST SPECIFICATIONS

ISO 18879

MULTIFIT INSERT
M14H10
M14H10
DISCONNECTABLE FAST-FIT
STRAIGHT MALE INSERT
SIZE PART REF. SIZE W.P DIMENSIONS mm
DN Dash inch DN Dash inch MPa A B C D
12 -08 1/2" M14H10-08-08 12 -08 1/2" 42 86.5 9.3 55.4 18.4

Back to top

ADAPTORS
A52194H A52324H A52014H
A52194H
STRAIGHT ADAPTOR
METRIC MALE ISO 6149-2
SIZE PART REF. THREAD W.P DIMENSIONS mm
DN Dash inch T MPa A B C D H1
12 -08 1/2" A52194H-22-08 M22x1.5 42 64.0 12.0 15.0 37.0 30.0

Back to top

A52324H
SAE MALE
OR BOSS TYPE
TO SAE J1926-2
SIZE PART REF. THREAD W.P DIMENSIONS mm
DN Dash inch T MPa A B C D H1
12 -08 1/2" A52324H-08-08 3/4"-16 42 64.8 10.0 14.0 37.0 30.0

Back to top

A52014H
BSP MALE
OR BOSS TYPE
TO ISO 1179-2
SIZE PART REF. THREAD W.P DIMENSIONS mm
DN Dash inch T MPa A B C D H1
12 -08 1/2" A52014H-08-08 1/2"-14 42 66.0 12.0 14.0 37.0 30.0

Back to top