DIAMONDSPIR

VERY HIGH PRESSURE

TECHNICAL DATA
# # # # # # # # #
PART REF. HOSE SIZE R.O.D O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN dash inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1 Std 2
H10018019* 19 -12 3/4" 29.1 1.15 32.1 1.26 560 8,120 2,240 32,480 280 11.02 1,660 1.12 IP+M01850-12
H10018025* 25 -16 1" 38.2 1.50 41.2 1.62 560 8,120 2,240 32,480 350 13.78 2,910 1.96 IP+M01850-16
H10018032* 31 -20 1.1/4" 47.7 1.88 50.9 2.00 525 7,610 2,100 30,450 420 16.54 4,210 2.83 IP+M01850-20
H10018038* 38 -24 1.1/2" 55.2 2.17 58.7 2.31 475 6,880 1,900 27,550 500 19.69 5,230 3.51 IS+M02700-24
H10018051* 51 -32 2" 68.4 2.69 71.9 2.83 420 6,090 1,680 24,360 600 23.62 6,680 4.49 IS+M02700-32

KEY FEATURES

• Very high pressure resistance
• Validated for high fatigue resistance
• Superior abrasion resistance
• High ozone and weather resistance
• Flame resistance to a wide range of specs.
• Antistatic and anti-toxic cover
• BIO Biological and mineral oils compatibility

APPLICATIONS & FLUIDS

• Hydraulics: heavy duty power lines, hydrostatic transmissions, in severe environmental conditions, specific installations with tough abrasion conditions, off-shore applications, underground and open pit mining
• Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water

CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
121 °C, 250 °F

TUBE

Oil resistant synthetic rubber

REINFORCEMENT

Six high tensile steel spirals (DN 25-76). Four high tensile steel spirals (DN 19)

COVER

STRONG – TYPE “SD”
Synthetic rubber with high abrasion, ozone, weather and heat resistance

APPLICABLE SPECS

Manuli® Design exceeds ISO 3862 R15

TYPE APPROVALS

ABS; FRAS; CU-TR; MSHA; MA